Positioning 2.20 m (7 ft 3 in.) Pickup Front Sheet

The 2.20 m (7 ft 3 in.) pickup front sheet (A) can be set in operating position for baling short crops or set in storage position for baling normal crops.

Hold front sheet (A) by hand, then remove spring-locking pin (F) and detach chain (B) from pin (E).

Repeat procedure on opposite side.

Let the front sheet (A) fall down.

Remove quick lock pins (C), washers and bracket (D).

Raise front sheet (A), then install bracket (D) as shown.

Install washers and quick lock pins (C)

Repeat procedure on opposite side.

The 2.20 m (7 ft 3 in) pickup front sheet is floating.

Hold front sheet (A) by hand, then remove quick lock pins (C), washers and bracket (D).

Remove spring-locking pin (F)

Repeat procedure on opposite side.

Raise front sheet (A), then attach chain (B) on pin (E) and secure it with spring-locking pin (F).

Position bracket (D) as shown, then install washers and quick lock pins (C).

Repeat procedure on opposite side.

NOTE: It would be necessary to remove front sheet when operating in high windrows

A-Front sheet
B-Chain
C-Quick lock pins
D-Bracket
E-Pin
F-Spring-locking pin

OUCC006,0000217 -19-04SEP00-1/1