OMCC50090: 570, 580 and 590 Round Balers( 322400- ), Block File: OUCC006_000021D_19

Every 30 Hours

A-Bale shape sender arm

B-Twine arm hub

C-Pickup lift crank

D-Declutchable upper roll drive hub

IMPORTANT: Do not use the baler wheel as a support to lubricate the declutchable upper roll drive hub grease fitting. Always use a ladder or step ladder to gain access to this grease fitting.

Lubricate with John Deere GREASE-GARD.

OUCC006,000021D -19-04SEP00-1/5

A-Pickup chain idler

B-Pickup gauge wheel

C-1.81 m (5 ft 11 in) pickup picker link

D-2.20 m (7 ft 3 in) pickup picker link

Lubricate with John Deere GREASE-GARD.

OUCC006,000021D -19-04SEP00-2/5

A-Tensioner of staggered packer drive chain (2.20 m; 7 ft 3 in. pickup)

Lubricate with John Deere GREASE-GARD.

OUCC006,000021D -19-04SEP00-3/5

A-Bearing of precutter drive sprocket

Lubricate with John Deere GREASE-GARD.

OUCC006,000021D -19-04SEP00-4/5

A-Floating rod of baler with 2.20 m (7 ft 3 in) pickup up to S.N. 327823

Lubricate with John Deere GREASE-GARD.

OUCC006,000021D -19-04SEP00-5/5