Adjusting 1.41 m (4 ft 7 in.) Pickup Drive Chain

To ensure that all slack is removed from chain, close gate and engage PTO a few seconds. Shut off tractor engine.

Adjust tension of pickup drive chain (A) as follows:

Loosen the idler mounting screw.

Press idler (B) against chain so that chain deflection to the opposite strand of idler is about 10 mm (0.39 in.).

Tighten the idler mounting screw.

Engage PTO a few seconds.

Check the chain deflection. Repeat adjustment if necessary.

A-Pickup drive chain
B-Idler

OUCC006,0000221 -19-04SEP00-1/1