Replacing Pickup Drive Shear Bolt (Baler without Precutter Device)

On Baler With 1.41 m (4 ft 7 in) Pickup

Line up holes in shear bolt hub and install a M6 x 30 grade 8.8 cap screw and lock nut (A).

On Baler With 1.81 m (5 ft 11 in) Pickup

Line up holes in shear bolt hub and install a M8 x 40 grade 8.8 cap screw and lock nut (A).

On Baler With 2.20 m (7 ft 3 in) Pickup

Line up holes in shear bolt hub and install a M8 x 35 grade 8.8 cap screw and lock nut (A).

Reinstall all shields previously removed.

NOTE: See your John Deere dealer to obtain the appropriate hardware.

OUCC006,0000222 -19-04SEP00-1/1