Adjusting 2.20 m (7 ft 3 in.) Pickup Gauge Wheels (from S.N. 327824)

IMPORTANT: Gauge wheels are designed to be in constant contact with the ground

Act on selective control valve lever to fully lower the pickup.

Remove spring-locking pin (B) then choose one of the positioning holes (C) to fix support (A). Install spring-locking pin (B).

Repeat procedure on opposite side.

Act on selective control valve lever to fully lower the pickup.

CC1018539


A-Gauge wheel support
B-Spring locking pin
C-Positioning holes

OUCC006,0000265 -19-16OCT00-1/1