Adjusting 2.20 m (7 ft 3 in.) Pickup Height (up to S.N. 327823)

Gauge wheels are designed to be constantly in contact with the ground. Adjust pickup height by positioning gauge wheel support (A) as follows:

Act on selective control valve lever to fully raise the pickup.

Remove spring-locking pin (B) then choose one of the positioning holes (C) to fix support (A). Install spring-locking pin (B).

Repeat procedure on opposite side.

Act on selective control valve lever to fully lower the pickup.

CC016272


A-Gauge wheel support
B-Spring locking pin
C-Positioning holes

OUCC006,0000268 -19-23OCT00-1/1