2.
Raise tractor PTO shield (B), if equipped.
3.
Pull back on collar (A). Collar will "click" and hold in ready position.
4.
Align splines by rotating mower-conditioner driveline. Push driveline onto tractor PTO shaft until collar (A) snaps forward.
5.
To check if latched, pull back on shield (C). Do not pull on collar (A), as this will release latch.
6.
Attach the shield safety chain to the hole provided in the tractor to avoid shield rotation.
7.
Lower tractor PTO shield.
A-Collar
B-PTO Shield
C-Shield
|