|
1.
Put mower-conditioner in a dry place.
2.
Clean mower-conditioner thoroughly. Trash and dirt will draw moisture and cause rust.
3.
Thoroughly lubricate machine. (See Lubrication and Maintenance section.)
4.
Check condition of knives; reverse or replace as necessary.
5.
Remove tension from main and conditioner drive belts.
6.
Paint all parts where necessary.
|
7.
Put blocking under the wheel supports, taking load off tires. DO NOT DEFLATE TIRES. If exposed, put covers over tires to protect them from light, grease, and oil.
8.
List replacement parts needed and order them early.
9.
Carefully check hydraulic hoses. Change any damaged hydraulic hoses.
10.
Store machine in a dry sheltered place.
|