Daily Checks
CAUTION:
To avoid bodily injury, disengage PTO and shut off tractor engine before starting prechecks.
Inspect and service machine before starting work each day.
-
Check and adjust tension at main drive belt and conditioner drive belt (See procedures in Service section).
-
Check disk wear (See procedure in Service section).
-
Check knives : reverse or replace if knives are blunt (See Checking Knife Wear in Service section).
-
Check that knives are correctly positioned.
-
Check that knives rotate freely.
-
Check for any loose bolts and missing hardware.
-
Check platform lift movements.
|