Adjusting Platform Float

NOTE: Tongue must be in operating position to adjust platform float correctly.

Adjust side gauge shoes and tilt control cylinder before adjusting platform float.

Use lightest float setting that allows platform to remain firmly on the ground without bouncing. The platform should follow uneven ground without gouging or scraping. An initial starting point should be within specifications at each end of platform.

Specification

Initial Float Setting -Force 670-780 N (70-80 kg; 150-175 lb)

1. Adjust side gauge shoes and tilt control cylinder to desired settings. (See Settings for Various Crop Conditions in this section.)

2. Remove crank (A) from storage position.

  • Turn handle clockwise to decrease ground pressure
  • Turn handle counterclockwise to increase ground pressure

3. Return crank to storage position.

4. Repeat on opposite side.

E41323

Adjusting Position

E41350

Storage Position


A-Crank

OUCC006,0000289 -19-08NOV00-1/1