Changing wheels-Mower-Conditioner

1. Lower platform completely.

2. Shut off tractor engine and remove key.

3. Install floor jack under wheel arm frame.

4. Raise frame and remove six wheel nuts and wheel.

IMPORTANT: Wheels should be installed with valve stems to the outside. Incorrect assembly can cause wheel hardware to loosen.

5. Install wheel with valve stem to the outside. Install and tighten nuts to specifications.

Specification

Wheel Nuts -Torque 240 N·m (175 lb-ft)

6. Lower machine and remove floor jack.

7. Check tire inflation. (See Preparing the Mower-Conditioner section.)

IMPORTANT: Check wheel nut torque after the first 10 hours of use.

E41343

946 Shown

OUCC006,00002CD -19-13DEC00-1/1