Changing wheels-Transport System (If Equipped)

1. Install floor jack under frame.

2. Raise frame and remove six wheel bolts and wheel.

IMPORTANT: Wheels should be installed with valve stems to the outside. Incorrect assembly can cause wheel hardware to loosen.

3. Install wheel with valve stem to the outside. Install and tighten bolts to specifications.

Specification

Wheel Bolts -Torque 210 N·m (155 lb-ft)

4. Lower machine and remove floor jack.

5. Check tire inflation. (See Preparing the Mower-Conditioner section.)

IMPORTANT: Check wheel nut torque after the first 10 hours of use.

CC017030

OUCC006,00002CE -19-13DEC00-1/1