Operating the Round Bale Elevator

Multi-Function Lever

CAUTION: Help prevent bodily injuries or death, never use the round bale elevator to park the loader.

IMPORTANT: Do not handle bales that exceed bale weight of 600 kg (1322 lb).

a. Opening and closing gripper

Press and release button (B) to select third function, then press on top of rocker switch (A) to open the bale gripper and on bottom of rocker switch (A) to close it.

b. Raising and lowering the elevator

Press and release button (C) to select fourth function, then press on top of rocker switch (A) to raise the elevator and on bottom of rocker switch (A) to lower it.

2. Bale elevator operated with a 2-function ICV and diverter valve

a. Opening and closing gripper

Continuously press on button (B) then move lever (E) to the left-hand side to close the gripper and to the right-hand side to open it. Move lever to the neutral position before releasing button (B).

b. Raising and lowering the elevator

Continuously press on button (C) then move lever (E) to the left-hand side to raise the bale elevator and to the right-hand side to lower it. Move lever to the neutral position before releasing button (C).

A-Rocker switch
B-3rd function
C-4th function
D-5th function
E-Lever

OUCC006,0000814 -19-09JAN03-1/2

If opening and closing response is opposite to control movement, reverse the hydraulic connections on front end.

OUCC006,0000814 -19-09JAN03-2/2