Operating Loader with Implements from Other Manufacturers
John Deere loaders are designed to be used with John Deere implements.
John Deere accepts no liability for damage or injury resulting from the use of implements from other manufacturers, these risks must be borne solely by the user.
If using implements from other manufacturers which are made compatible with John Deere loader implement carriers, the loader specifications may be affected as follows:
1.
Implement latching
If using implements from other manufacturers, always ensure that implement is securely fitted on John Deere implement carrier prior to operating.
2.
Self levelling
Always check self-levelling reaction before operating John Deere loader with implements from other manufacturers.
If self levelling does not respond as expected, the implement level must be controlled manually using the appropriate lever to avoid falling loads.
3.
Interference
Check for interference and take necessary action to avoid them.
4.
Maximum roll back and dump angles
Roll back and dump angle can be affected.
Avoid loads spilling back from the implement by leveling the attachment manually using control lever, if necessary.
5.
Loader specifications
All the specifications of the loader may be affected.
|