Heavy-Duty Manure ForkHeavy-duty manure forks are available in the following widths: The chart below gives the compatibility between forks and loaders. Only the combinations marked OK are allowed. |
|
| Fork Width | 1550 mm (61 in.) | 1900 mm (75 in.) | |
|---|---|---|---|
| Loader with Standard Mounting Frame | Compatibility | ||
| 531 | NSL | OK | |
| 531 | MSL | OK | |
| 551 | NSL | OK | |
| 551 | HSL | OK | |
| 551 | MSL | OK | OK |
| 631 | NSL | OK | |
| 631 | HSL | OK | |
| 631 | MSL | OK | OK |
| 651 | NSL | OK | |
| 651 | HSL | OK | |
| 651 | MSL | OK | OK |
| 661 | MSL | OK | OK |
| 731 | NSL | OK | OK |
| 731 | HSL | OK | OK |
| 731 | MSL | OK | OK |
| 751 | MSL | OK | |
| 746 | MSL | OK | |
| Loader with Forward Mounting Frame | Compatibility | ||
| 551 | NSL | OK | |
| 551 | HSL | OK | |
| 631 | NSL | OK | |
| 631 | HSL | OK | |
|
OK: Fork allowed on this loader Both forks are available with 680 mm (27 in.) or 810 mm (32 in.) tines. |
OUCC006,00009A7 -19-08JUL03-1/1 |