531 NSL Specifications (Standard Mounting Frame)1

CC1025967

Tractor model... 5310
Recommended John Deere ballast... 750 kg (1650 lb)
Front tire size... 320/70R24
Rear tire size... 480/70R30
Hydraulic operating pressure... 18000 kPa (180 bar; 2610 psi)
   
Rated Operating Load at pallet bottom midpoint:
at ground level... 1120 kg (2470 lb)
at height A = 2 m (6 ft 6 in.)... 1030 kg (2270 lb)
at full height... 890 kg (1960 lb)
   
Brake out capacity at front of bucket... 11500 N
   
(B) Maximum lift height at pivot point... 3.25 m (10 ft 8 in.)
   
Clearance:  
(C) with bucket levelled... 3.04 m (9 ft 12 in.)
(D) with bucket dumped... 2.3 m (7 ft 7 in.)
   
(E) Digging depth... 50 mm (2 in.)
   
Reach:  
(F) at full height, dumped bucket... 530 mm (1 ft 9 in.)
(G) at ground level, levelled bucket... 2.12 m (7 ft)
   
(H) Maximum dump angle at full height... 66°
   
(I) Maximum roll back angle at ground... 40°
   
Weight of loader, attachment and mounting frame... 595 kg (1312 lb)
   
The above mentioned Rated Operating Loads are only applicable with the equipment specified and under the conditions stated (See "Rated Operating Load" in this section).

 

1(Specifications and design subject to change without notice)

OUCC006,0000B28 -19-12AUG04-1/1