531 MSL Specifications (Standard Mounting Frame)1

CC1025967

Tractor model... 5510
Recommended John Deere ballast... 900 kg (2000 lb)
Front tire size... 320/70R24
Rear tire size... 480/70R30
Hydraulic operating pressure... 180000 kPa (180 bar; 2610 lb)
   
Rated Operating Load at pallet bottom midpoint:
at ground level... 1315 kg (2900 lb)
at height A = 2 m (6 ft 6 in.)... 1210 kg (2670 lb)
at full height... 1165 kg (2570 lb)
   
Brake out capacity at front of bucket... 13300 N
   
(B) Maximum lift height at pivot point... 3.25 m (10 ft 8 in.)
   
Clearance:  
(C) with bucket levelled... 3.04 m (9 ft. 12 in.)
(D) with bucket dumped... 2.30 m (7 ft 7 in.)
   
(E) Digging depth... 60 mm (2.3 in.)
   
Reach:  
(F) at full height, dumped bucket... 300 mm (1 ft)
(G) at ground level, levelled bucket... 2.07 m (6 ft 9 in.)
   
(H) Maximum dump angle at full height... 66°
   
(I) Maximum roll back angle at ground... 40°
   
Weight of loader, attachment and mounting frame... 630 kg (1389 lb)
   
The above mentioned Rated Operating Loads are only applicable with the equipment specified and under the conditions stated (See "Rated Operating Load" in this section).

 

1(Specifications and design subject to change without notice)

OUCC006,0000B29 -19-13AUG04-1/1