551 NSL and HSL Specifications (Forward Mounting Frame)1

CC1025967

Tractor model... 5720
Recommended John Deere ballast... 900 kg (2000 lb)
Front tire size... 360/70R24
Rear tire size... 480/70R30
Hydraulic operating pressure... 20000 kPa (200 bar; 2900 psi)
   
Rated Operating Load at pallet bottom midpoint:
at ground level... 1435 kg (3163 lb)
at height A = 2 m (6 ft 6 in.)... 1420 kg (3130 lb)
at full height... 1255 kg (2767 lb)
   
Brake out capacity at front of bucket... 14450 N
   
(B) Maximum lift height at pivot point... 3.63 m (11 ft 10 in.)
   
Clearance:  
(C) with bucket levelled... 3.41 m (11 ft 2 in.)
(D) with bucket dumped... 2.66 m (8 ft 8 in.)
   
(E) Digging depth... 40 mm (1.6 in.)
   
Reach:  
(F) at full height, dumped bucket... 200 mm (7.9 in.)
(G) at ground level, levelled bucket... 2.17 m (7 ft 1 in.)
   
(H) Maximum dump angle at full height... 71°
   
(I) Maximum roll back angle at ground... 39°
   
Weight of loader, attachment and mounting frame... 595 kg (1311 lb)
   
The above mentioned Rated Operating Loads are only applicable with the equipment specified and under the conditions stated (See "Rated Operating Load" in this section).

 

1(Specifications and design subject to change without notice)

OUCC006,0000B2B -19-13AUG04-1/1