551 MSL Specifications (Standard Mounting Frame)1

CC1025967

Tractor model... 5720
Recommended John Deere ballast... 900 kg (2000 lb)
Front tire size... 440/65R24
Rear tire size... 540/65R34
Hydraulic operating pressure... 20000 kPa (200 bar; 2900 psi)
   
Rated Operating Load at pallet bottom midpoint:
at ground level... 1700 kg (3747 lb)
at height A = 2 m (6 ft 6 in.)... 1700 kg (3747 lb)
at full height... 1700 kg (3747 lb)
   
Brake out capacity at front of bucket... 17000 N
   
(B) Maximum lift height at pivot point... 3.65 m (11 ft 11 in.)
   
Clearance:  
(C) with bucket levelled... 3.43 m (11 ft 3 in.)
(D) with bucket dumped... 2.68 m (8 ft 8 in.)
   
(E) Digging depth... 40 mm (1.6 in.)
   
Reach:  
(F) at full height, dumped bucket... 230 mm (9 in.)
(G) at ground level, levelled bucket... 2.12 m (7 ft)
   
(H) Maximum dump angle at full height... 72°
   
(I) Maximum roll back angle at ground... 36°
   
Weight of loader, attachment and mounting frame... 655 kg (1444 lb)
   
The above mentioned Rated Operating Loads are only applicable with the equipment specified and under the conditions stated (See "Rated Operating Load" in this section).

 

1(Specifications and design subject to change without notice)

OUCC006,0000B2C -19-12AUG04-1/1