651 NSL and HSL Specifications (Standard Mounting Frame)1

CC1025967

Tractor model... 6420
Recommended John Deere ballast... 900 kg (2000 lb)
Front tire size... 420/70R24
Rear tire size... 520/70R38
Hydraulic operating pressure... 20000 kPa (200 bar; 2900 psi)
   
Rated Operating Load at pallet bottom midpoint:
at ground level... 2030 kg (4475 lb)
at height A = 2 m (6 ft 6 in.)... 1725 kg (3803 lb)
at full height... 1345 kg (2965 lb)
   
Brake out capacity at front of bucket... 20000 N
   
(B) Maximum lift height at pivot point... 4.11 m (13 ft 5 in.)
   
Clearance:  
(C) with bucket levelled... 3.90 m (12 ft 9 in.)
(D) with bucket dumped... 3.16 m (10 ft 4 in.)
   
(E) Digging depth... 120 mm (4.7 in.)
   
Reach:  
(F) at full height, dumped bucket... 290 mm (11.4 in.)
(G) at ground level, levelled bucket... 2.56 m (8 ft 5 in.)
   
(H) Maximum dump angle at full height... 66°
   
(I) Maximum roll back angle at ground... 45°
   
Weight of loader, attachment and mounting frame... 685 kg (1510 lb)
   
The above mentioned Rated Operating Loads are only applicable with the equipment specified and under the conditions stated (See "Rated Operating Load" in this section).

 

1(Specifications and design subject to change without notice)

OUCC006,0000B30 -19-13AUG04-1/1