751 MSL Specifications (Standard Mounting Frame)1

CC1025967

Tractor model... 6920
Recommended John Deere ballast... 1150 kg (2550 lb)
Front tire size... 540/65R28
Rear tire size... 650/65R38
Hydraulic operating pressure... 20000 kPa (200 bar; 2900 psi)
   
Rated Operating Load at pallet bottom midpoint:
at ground level... 3020 kg (6658 lb)
at height A = 2 m (6 ft 6 in.)... 2460 kg (5423 lb)
at full height... 2230 kg (4916 lb)
   
Brake out capacity at front of bucket... 29200 N
   
(B) Maximum lift height at pivot point... 4.27 m (14 ft)
   
Clearance:  
(C) with bucket levelled... 3.98 m (13 ft)
(D) with bucket dumped... 3.18 m (10 ft 5 in.)
   
(E) Digging depth... 150 mm (5.9 in.)
   
Reach:  
(F) at full height, dumped bucket... 420 mm (1.4 ft)
(G) at ground level, levelled bucket... 2.75 m (9 ft)
   
(H) Maximum dump angle at full height... 72°
   
(I) Maximum roll back angle at ground... 43°
   
Weight of loader, attachment and mounting frame... 1090 kg (2403 lb)
   
The above mentioned Rated Operating Loads are only applicable with the equipment specified and under the conditions stated (See "Rated Operating Load" in this section).

 

1(Specifications and design subject to change without notice)

OUCC006,0000B35 -19-13AUG04-1/1