746 MSL Specifications (Standard Mounting Frame)1

CC1025967

Tractor model... 7820
Recommended John Deere ballast... 1000 kg (2205 lb)
Front tire size... 380/85 R 34
Rear tire size... 480/80 R 46
Hydraulic operating pressure... 20000 kPa (200 bar; 2900 psi)
   
Rated Operating Load at pallet bottom midpoint:  
at height A = 1.5 m (4 ft 9 in.)... 3280 kg (7231 lb)
at full height... 2240 kg (4939 lb)
   
Brake out capacity at front of bucket... 43100 N
   
(B) Maximum lift height at pivot point... 4.65 m (15 ft 3 in.)
   
Clearance:  
(C) with bucket levelled... 4.47 m (14 ft 8 in.)
(D) with bucket dumped... 3.82 m (12 ft 6 in.)
   
(E) Digging depth... 150 mm (5.9 in.)
   
Reach:  
(F) at full height, dumped bucket... 820 mm (2 ft 8 in.)
(G) at ground level, levelled bucket... 2.80 m (9 ft 2 in.)
   
(H) Maximum dump angle at full height... 59°
   
(I) Maximum roll back angle at ground... 42°
   
Weight of loader, attachment and mounting frame... 1360 kg (3000 lb)
   
The above mentioned Rated Operating Loads are only applicable with the equipment specified and under the conditions stated (See "Rated Operating Load" in this section).

 

1(Specifications and design subject to change without notice)

OUCC006,0000B36 -19-13AUG04-1/1