Adjusting 2.00 m (6 ft 7 in.) Precutter Pickup Gauge Wheels (without Transport Position and Downstop)IMPORTANT: Gauge wheels are designed to be in constant contact with the ground Adjust gauge wheels to obtain the desired pickup height as follows: 1. Check first that precutter pickup operating mode is activated.2. Act on selective control valve lever to fully raise the pickup. 3. On both sides, remove spring-locking pins (B), choose one of the positioning holes (C) to fix support (A) on studs (D) and install spring-locking pins (B).
|
|
CC03745,0000B49 -19-07JUN05-1/1 |