|
Crop does not reach grouper
|
The crop falls down in front of canvas
|
Increase ground speed
Check that on 1355-1365 rotor speed is adjusted at 870 rpm. See "Operating the Mower-conditioner" Section
On 1355-1365, choose the best position of conditioning hood. See "Operating the Mower-conditioner" Section
Set the rotor speed at 1000 rpm. See "Attachments" Section
|
|
|
Wide rear windrow deflector not in uppermost position
|
Adjust wide rear deflector in uppermost position. See "Operating the Mower-conditioner" Section
|
|
Canvas plugging
|
Shut-off valve lever seized
|
Clean and lubricate lever
|
|
|
Ground speed too fast for crop conditions
|
Reduce ground speed in heavy, bushy or extremely wet crops
|
|
|
Ground speed too slow for crop conditions
|
Increasing ground speed may improve crop delivery
|
|
|
Mower-conditioner speed too slow
|
Operate PTO at rated speed
|
|
|
Canvas speed not adapted to ground speed
|
Increase or reduce canvas speed
|
|
|
Hydraulic pump reservoir oil level incorrect
|
Refill with specified oil quality (See "Lubrication and Maintenance" Section)
|
|
|
Pump belt tension incorrect
|
Adjust belt tension
|
|
|
Canvas tension incorrect
|
Adjust canvas tension
|