Breaking-In Mower-Conditioner

After mower-conditioner has been connected to tractor, inspect for loose hardware.

CAUTION: Stay away from machine while it is running. Always disengage PTO, shut off tractor engine and remove the key before inspecting machine.

Run machine empty at slow idle speed for a short time. Disengage PTO, shut off engine and remove the key before inspecting the machine for loose hardware.

Mower conditioner with swivel hitch:

Change oil of gear cases after first 50 hours of use. See "After First 50 Hours" in "Lubrication and Maintenance" section.

IMPORTANT: After this initial break-in period, the machine is ready for normal operation. Do not operate machine empty for long periods of time as this may lead to premature wear.

OUCC006,0000481 -19-04SEP01-1/1