Description of ELC Plus Monitor with Net/Twine Tying Switch on Monitor

ELC Plus monitor allows to control twine or net tying.

Switch (I) allows to select the tying device.

NOTE: The middle position of the switch (I) is used to switch off the monitor.

A-Monitor
B-End bale distribution potentiometer; Net tie density potentiometer
C-Middle twine distribution potentiometer
D-Re-extension time potentiometer; Actuator positioning potentiometer
E-Manual control switch
F-"START" button
G-Adjusting screw
H-"IN CYCLE" light
I-Net/Twine tying switch

OUCC006,0000720 -19-17JUL02-1/1