Rotating Baler by Hand
 CAUTION:
DO NOT TAKE CHANCES! Never use any type of tool or spanner to turn baler by hand while tractor engine is running. Disengage the PTO, place transmission in "PARK", apply handbrake, shut off engine, remove ignition key and wait for moving parts to come to a standstill. Always remove tool as soon as you have finished using it.
A spanner can be used to turn nut (A) if it is necessary to rotate baler by hand.
A-Nut
|
Rotating Baler by Hand (up to S.N. 49999)
Rotating Baler by Hand (from S.N. 50000)
|
