Operate Baler Safely

Always check the road and general operating safety of the machine before using.

This machine features automatic sequence with dwelling positions: the machine may seem to stop and restart unexpectedly.

Before entering the working area of the machine, always:

• Disengage PTO.
• Shut off tractor engine.
• Remove main switch key.
• Relieve hydraulic pressure.
• Engage parking lock.
• Apply handbrake.
• Wait for all moving parts to come to a standstill.

To avoid injury or death by being pulled into the machine, DO NOT attempt to feed crop or twine into baler or unplug feed area WHILE BALER IS RUNNING. The baler feeds material faster than you can release it.

OUCC006,00010DA -19-29JUN06-1/1