Operating the Baler in Short, Dry, Slick Crops
In Case of Plugging:
Try one or more of the following methods:
-
Raise pickup as high as practical.
-
Reduce engine speed to 1500 rpm and shift to higher gear to maintain forward speed.
-
Reduce bale density as necessary.
-
Make larger windrows (rake together as necessary).
-
Replace broken pickup teeth.
-
Whenever necessary, install the straw bar kit to improve the pickup to bale chamber feeding. (See "Installing Straw Bar" in this Section).
-
Install belt kit (except for MultiCrop baler). See "Attachments" section.
Baler with Precutter Device:
It may be necessary to reduce number of knives or to remove them.
|
|