Channel 003: Re-extension Twine Tying Program

This program allows to have more twine coils at the end of the bale tying and may help prevent twine unrolling.

After the set number at tying end has been applied, the twine arm is extended again towards the center of the bale to the set distance and then, it is completely retracted.

In "CH003", press "PLUS" key to activate this program and adjust the re-extension distance to 20, 40 or 60 cm (8, 16 or 24 in.).

Press "MINUS" key to decrease the re-extension distance from 60 cm to 40 or 20 cm (from 24 in. to 16 or 8 in.) and switch off this program. When the re-extension twine tying program is switched off, the LCD screen displays "OFF".

OUCC006,000055D -19-13NOV01-1/1