OMCC58667: 572, 582 and 592 Round Balers(70000- ), Block File: OUCC006_0000586_19

Channel 025: Test of Precutter Knife Switches

"CH025" allows to test the knife switches.

The two knife switches are pressed when the knives are engaged and released when the knives are retracted.

Engage precutter knives (see "Retracting/Engaging Precutter Knives" in "Operating BaleTrak Control Monitor" section).

I The monitor displays "12" when both switches are pressed. II Manually release one switch then the other: the monitor displays "0" with a continuous beep when one or two switches are released.

If this test is not OK, see your John Deere dealer.

NOTE: See "Adjusting Precutter knife switches" in "Service" section to check the knife switches adjustment.

I-Both switches pressed
II-One or both switches released

OUCC006,0000586 -19-15NOV01-1/1