Channel 002: Dry Straw Twine Tying Program

When baling dry straw, it may be desirable to quickly place twine across full width of bale to prevent straw from flaking off in the baler.

The dry straw twine program provides for full speed twine arm movement from left to right, then from right to left. Then, the twine arm comes backs to the right, pauses to place the set number at tying start, and continues to apply twines as set in the monitor.

In "CH002", press "PLUS" key to activate the program. The LCD screen displays "ON".

Press "MINUS" key to switch off the program. The LCD screen displays "OFF".

OUCC006,00006A7 -19-22MAY02-1/1