Setting the 1.81 m (5 ft 11 in.) Pickup Feeder Forks

The 1.81 m (5 ft 11 in.) pickup feeder forks can be set into two working positions:

Position 1 (factory adjusted):

This position will be used when baling silage or using net tying system, with small bales below 1.2 m (3 ft 11 in.).

Position 2:

This position will be used when baling short, dry, slick crops. This position maximizes the feeder fork stroke into bale chamber.

IMPORTANT: When changing from one position to the other, always check that all feeder forks are set to the same position.

OUCC006,00006C0 -19-28MAY02-1/1