Channel 026: Flax Twine Tying Program

In this program two twines are fed continuously in the middle of the bale during bale formation to separate the layers. When the desired bale diameter is reached, a normal tying cycle is started to tie the bale.

In "CH026", press "PLUS" key to activate the program. The LCD screen displays "ON".

Press "MINUS" key to switch off the program. The LCD screen displays "OFF".

NOTE: In the flax twine tying program, the distance of tying ends can be adjusted from 8 to 50 cm (3 to 20 in.).

NOTE: The flax twine tying cycle begins when these conditions are met:

• The gate is closed.

• The PTO is running.

• A bale is detected.

• The bale diameter is under 60 cm (23.5 in.).

OUCC006,00009BC -19-22JUL03-1/1