Adjusting Pickup Auger Scrapers

1. Position scraper (A) as close as possible to auger (B) avoiding contact.

2. Adjust this clearance by means of adjusting screws (C).

3. Tighten screws (C).

4. Repeat this process on the opposite auger.


A-Scraper
B-Auger
C-Screws

CC001042

1.81 m (5 ft 11 in) and 2 m (6 ft 7 in) pickup shown

CC016187

2.20 m (7 ft 3 in) pickup shown

OUCC006,0000CB8 -19-05OCT04-1/1