Adjusting Lower Rear Gate Roll (NR 8) Scraper

1. Unscrew fixing screws (C) to adjust scraper (A).

2. Scraper (A) must be adjusted as close as possible to roll (B), leaving enough space to avoid any contact with the roll.

3. Tighten fixing screws (C) to following torque:

Specification

Lower Rear Gate Roll Scraper Fixing Screws -Torque 55 N·m (40 lb-ft)

CC013978


A-Scraper
B-Roll
C-Screw

OUCC006,0000E99 -19-19JUL05-1/1