Selecting Tractor PTO Speed

CAUTION: Under no circumstances should a baler equipped for 540 rpm PTO drive be operated with a tractor at 750 or 1000 rpm PTO speed.

Under no circumstances should a baler equipped for 1000 rpm PTO drive be operated with a tractor at 540 or 750 rpm PTO speed.

IMPORTANT: Always run tractor at rated PTO speed. Overspeed will damage baler.

The tractor PTO shaft size must be 1-3/8 in.

Follow the tractor Operator's Manual to install the appropriate PTO shaft.

Refer to tag on baler gear case to select tractor PTO speed.

Follow the tractor Operator's Manual to properly set the PTO speed at 540 or 1000 rpm.

OUCC006,0000EAC -19-19JUL05-1/1