Connecting Telescoping Hook-Up to Tractor PTO Shaft

CAUTION: Never operate 540 rpm baler with 1000 rpm PTO.

Never attach telescoping hook-up while the tractor is running.

Never use a steel hammer to connect or disconnect the hook-up on PTO shaft.

IMPORTANT: Keep hook-up and PTO shaft splines free from paint, dirt, chaff and burrs.

The baler can be attached to any tractor equipped with a drawbar or trailer hitch and a 540 rpm PTO.

IMPORTANT: If the baler must be run with a 1000 rpm PTO tractor refer to "Setting Baler For 1000 rpm Operation" in "Preparing the Baler" Section.

Refer to the basic telescoping hook-up Operator's Manual to properly connect telescoping hook-up to the tractor PTO shaft.

OUCC006,0000F04 -19-03AUG05-1/1