Adjusting Twine Spacing

The double twine arm (A) can be adjusted to allow more or less space between twines around bale.

Loosen nut (B) and push arm (C) forward or backward to allow more or less space. Tighten nut (B).

IMPORTANT: In case of baler equipped with the BaleTrak control monitor, the spacing chosen must be the same as the one set with the monitor. (See "Setting Twine Tying" in "Operating BaleTrak Monitor" section.)

CC001027

OUCC006,0000F22 -19-19JUL05-1/1