Channel 015: Test of Left Gate Switch (592 Baler Only)

"CH015" allows to test the left gate switch.

Slightly open the gate of the baler then manually activate the switch.

The monitor displays "0" when the switch is closed (A) and "12" with a continuous beep when the switch is open (B).

If this test is not OK, see your John Deere dealer.

NOTE: See "Adjusting Gate Latch Switch" in "Service" section to check the switch adjustment.

A-Left gate switch closed
B-Left gate switch opened

OUCC006,0000F24 -19-11JUL05-1/1