Unplugging Baler without Rotary Feeder Pickup (592 Only)

CAUTION: Never unplug baler manually before shutting off tractor.

2. Raise belt tension arm by means of tractor selective control valve until upper arm just starts to move.

3. Engage PTO.

IMPORTANT: If belts slip, lower belt tension arm. Prolonged belt slippage may cause baler damage.

If this does not clear the baler, discharge bale and shut off tractor.

Place gate lock lever (A) in "Lock" position and unplug manually.

A-Gate Lock Lever

OUCC006,000116E -19-26SEP06-1/1