A-ON/OFF key
B-Twine or net tying key
C-Precutter knife key
D-Rotary feeder reverse key
E-Tying start key (twine only)
F-Tying end key (twine only)

G-Twine spacing/number of net turns
H-Tying end distance (twine only)
I-Soft core key

J-Program key
K-Tying auto start bale diameter
L-Bale counters
M-Minus key

N-Plus key
O-Retract key
P-Extend key
Q-Manually start an automatic tying cycle

NOTE: When any key is pressed, buzzer will beep.

A short pressure on "PLUS" or "MINUS" keys gives an increment of selected value.

A long pressure on "PLUS" or "MINUS" keys accelerates the increment display.

OUCC006,0001184 -19-27SEP06-1/1