Adjusting Upper Arm Spring (592 Baler with Rotary Feeder Device Only)

If spring has been replaced or lock nuts have been removed, adjust spring as follows:

1. Close the gate and lower the belt tension arm.

2. Adjust lock nuts (A) until dimension (B) is:

Specification

Upper arm spring (592 baler with rotary feeder device) -Length 918 ± 1.5 mm (36.14 ± 0.06 in.)


A-Lock nut
B-Dimension

CC009652

OUCC006,0001196 -19-28SEP06-1/1