Channel 027: Recording Lowest Position of Belt Tension Arm

"CH027" allows to record the lowest position of belt tension arm.

Move belt tension arm to its lowest position with selective control valve lever

Engage PTO a few seconds to remove belt slack. Shut off tractor engine.

Select the channel 27.

In "CH027", press simultaneously "PLUS" and "MINUS" keys to record the value of potentiometer corresponding to the lowest position of belt tension arm.

IMPORTANT: Once belt tension arm lowest position has been recorded, check that highest position is still correct. Switch to channel 5, set the belt tension arm to the highest position and ensure that monitor beeps continuously and LCD screen displays the target value (± 5). If not, readjust channel 5. If the target value is correct, make adjustment described in channel 28.

OUCC006,00011B8 -19-18JAN07-1/1