Adjusting Lower Front Gate Roll (NR 9) Scraper (if Equipped)

1. Unscrew fixing screws (B) to adjust scraper (A).

2. Scraper (A) must be adjusted as close as possible to roll (C), leaving enough space to avoid any contact with the roll.

3. Tighten fixing screws (B) to following torque:

Specification

Lower Front Gate Roll Scraper -Torque 55 N·m (40 lb-ft)

CC1019900


A-Scraper
B-Screw
C-Roll

OUCC006,0001215 -19-15NOV06-1/1