Connecting Baler Wiring Harness to Control Monitors

Line up timing marks on connector (A) and monitor then tighten locking ring.

IMPORTANT: Be sure timing marks on connector and monitor are lined up before tightening locking ring.

Connect the power supply plug (B) to the convenience outlet (C) on the tractor.

causym CAUTION: For ELC Plus monitor, disconnect power supply plug (B) after baler operation, even though monitor is switched OFF.


A-Connector
B-Power supply plug
C-Outlet

CC1027524

ELC Plus Monitor

CC1020347

BaleTrak Monitor

CC1027507

OUCC006,000127E -19-06SEP07-1/1