Adjusting Bale Size Switch (Baler with ELC Monitor)

1. Close the gate.

2. Loosen switch mounting screws (A).

3. Position switch roller (B) on highest (numbered) portion of cam (C).

4. Adjust switch until specified clearance (D) is achieved:

Specification

Switch body to switch arm -Clearance 1 mm (0.04 in.)

5. Tighten screws (A).

NOTE: On baler equipped with soft core option, the second cam (E) is the soft core diameter cam.


A-Screws
B-Switch roller
C-Bale size cam
D-Clearance
E-Soft core cam

CC1026245

OUCC006,0001295 -19-01OCT07-1/1