Checking Net Cut Switch Adjustment (Test 8)
|
|
|
|
|
|
IMPORTANT: Prior to carry out this test, make sure that test 1 to 7 results are "OK". Proceed to the relevant tests described in this Section. Proceed as follows: 1. Gently push on stud (B). |
2. Check that net cut switch (D) is activated after a 2 mm (0.08 in.) displacement (C) of stud (B). If not, loosen switch fixing screws (A) and readjust switch position accordingly. Proceed to test 9. |
OUCC006,0001297 -19-01OCT07-1/1 |