Replacing Pickup Drive Shear Bolt (Baler without Rotary Feeder Device)On Baler with 1.81 m (5 ft 11 in.) Pickup Line up holes in shear bolt hub and install a M8 x 40 grade 8.8 cap screw and lock nut. On Baler with 2.00 m (6 ft 7 in.) Pickup Use one shear bolt (A) stored on the provided support (B). Line up holes in shear bolt hub and install a M8 x 35 grade 8.8 cap screw (screw head face inward) and lock nut. On Baler with 2.20 m (7 ft 3 in.) Pickup Use one shear bolt (A) stored on the provided support (B). Line up holes in shear bolt hub and install a M8 x 35 grade 8.8 cap screw (screw head face outside) and lock nut. Reinstall all shields previously removed. NOTE: See your John Deere dealer to obtain the appropriate hardware. |
|
OUCC006,0001298 -19-13FEB07-1/1 |