Adjusting Brake Shoes (Baler from S.N. 80000)1. Release the hydraulic or air brake, and parking brake. For air brake system, see "Parking the Machine" in "Transporting" section.2. Raise baler off ground with a jack placed under axle until the wheels do not touch the ground any more. 3. Secure baler. 4. Screw or unscrew adjusting screw (B) to move brake lever (A) in the direction of braking, while at the same time making the wheel rotate, until the brake shoes come into contact with the drum. 5. Then slightly turn adjusting screw (B) in the opposite direction until the wheel is completely free to rotate. 6. Repeat procedure on opposite side.
|
|
OUCC006,000131A -19-27SEP07-1/1 |